Operation; Control Panel And Remote Control - LG LW6023IVSM Owner's Manual

Table of Contents

Advertisement

OPERATION

Control Panel and Remote Control

5
6
7
4
3
NOTE
• The feature may be changed according to the type of model.
• On control panel surface have protection film, Please remove film before use.
Power
1
Press to turn the air conditioner ON or
OFF.
Sleep Mode
2
This mode keeps operating noise to a
minimum and turns the air conditioner off
after a set time. The timer can be set from
1 to 12 hours.
• In the Sleep Mode, the setting
temperature increases by 2 °F after
30 minutes and additional 2 °F
after another 30 minutes for a more
comfortable sleep.
• The setting temperature increases up to
4 °F from the preset temperature.
Delay ON/OFF Timer
3
Delay ON - When the air conditioner is off,
set it to automatically turn on from 1 to 24
hours later, at its previous mode and fan
settings.
Delay OFF - When the air conditioner is
on, set it to automatically turn off from 1 to
24 hours later.
NOTE
• Each press of the Timer button
advances the timer by 1 hour. After
the last press the display returns to the
temperature setting.
14
8
1
2
Remote Control
1
4
Light Off(3 s)
3
Operation Mode
4
Press the Mode button to cycle between 4
types of air conditioner operation: Energy
Saver / Cool / Fan / Dry.
Energy Saver - In this mode the compressor
and fan turn off when the set temperature
is achieved. Approximately every 3 minutes
the fan turns on to allow the unit sensor to
accurately determine if more cooling is needed.
Cool - This mode is ideal on hot days to cool
and dehumidify the room quickly. Use the
Temp
buttons to set the desired room
temperature and use the Fan Speed button to
set the desired fan circulation speed.
Fan - In this mode the fan circulates air but the
compressor does not run. Use the Fan Speed
button to set fan speed to High, Medium or
Low. In this mode, display will show the current
room temperature and you cannot adjust the
set temperature.
• If the room temperature is lower than 33 °F,
display will show 'Lo'.
• If the room temperature is higher than 99 °F,
display will show 'HI'.
Dry - This mode is ideal for rainy and damp
days to dehumidify the room rather than cooling
it significantly. Humidity is removed from
the room by the combination of compressor
operation and the fan speed fixed at Low.
The compressor and fan turn off once the set
temperature is reached. Fan speed cannot be
adjusted in Dry mode.
EN
8
9
Auto Clean(3 s)
7
10
2

Advertisement

Table of Contents
loading

Table of Contents