Sanyo SA-58S5 Technical & Service Manual page 39

9-2-4. Removing Evaporator
(1) Remove screws holding top plate of evaporator. (Fig. 23)
(2) Remove top plate of evaporator. (Fig. 23)
(3) Remove screws holding evaporator. (Fig. 23)
(4) Grasp lower portion of the evaporator with both hands
and tilt it slightly and lift it carefully from the drain pan so
as not to distort the copper tube.
9-2-5. Removing Blower Wheel
(1) Loosen a nut holding blower wheel on motor shaft with
hex wrench. (Fig. 24)
(2) Extract the blower wheel.
9-2-6. Removing Condenser
(1) Remove screws holding top plate of condenser.(Fig. 25)
(2) Remove top plate of condenser. (Fig. 25)
(3) Remove screws holding condenser. (Fig. 25)
(4) Remove splash water proof plate on the right side of
condenser.(Fig. 25)
(5) Grasp lower portion of the condenser with both hands
and tilt it slightly and lift it carefully from the base pan so
as not to distort the copper tube.
35
020 D 17
Fig. 23
Fig. 24
Fig. 25