Panasonic KX-TG2336 Operating Instructions Manual page 54

Direct Commands
Menu item
Store VM access#
VM tone detect
Change language
Message alert
Ringer tone
(for base unit)
Incoming call tone
(for base unit)
Talking Caller ID
(for base unit)
During programming:
When "Save" is displayed, press the right soft key to save the new settings.
To exit programming, press [OFF].
• If you press the direct command incorrectly, press [OFF], then re-enter
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
* You need to first download melody data from the openLCR web site.
1
* Can be used to activate Caller IQ. See the leaflet included with this unit for more
2
information.
* For openLCR subscribers only.
3
* For openLCR subscribers only. If information is not downloaded to your unit, "Get
4
new Info.?" will be displayed. To download information, see page 61.
* After pressing [7], make sure "View Info.?" is displayed, then press the next
5
command.
If Caller IQ is turned off, "Turn CIQ on?" is displayed after pressing [7].
54
Command
[0] [7] [1] Go to Step 5 on page 42.
[0] [7] [2] [1] : On [0] : Off
[0] [8] [1] : English [2] : Spanish
[0] [#] [1] : On [0] : Off
[0] [*] [1] [1]–[3] : Tone pattern 1–3
[4]–[7] : Melody pattern 1–4
[8]–[9] : Downloaded melody
[0] [*] [2] [1] : On [2] : Twice [0] : Off
[0] [*] [4] [1] : On [0] : Off
Selection items
pattern 1–2 *
1
Page
—
p. 43
p. 13
p. 18
p. 17
p. 48
p. 26