Ringer Volume; Ringer Setting - Panasonic KX-TG2336 Operating Instructions Manual

Ringer Volume

You can select the handset or base unit ringer volumes to high, medium, low, or off.
The factory preset is HIGH. If the handset and base unit ringer is turned off, the
handset or base unit will ring at the low level for intercom calls, and will not ring for
outside calls. Caller names will not be announced even if the Talking Caller ID
feature is turned on (p. 25, 26).
Handset ringer volume
Press [MENU].
1
Scroll to "Ringer setting" by pressing [d]
2
or [B], then press Select.
Press Select at "Ringer volume".
3
Select the desired volume level by pressing
4
[d] or [B].
• The volume will change and ring.
• The number of steps indicates the volume level.
• To turn the ringer off, press [
"Off ?" is displayed.
Press Save.
5
• If the handset ringer is turned off, "Ringer off" will be displayed while not in
use. If the handset is off the base unit when there are missed calls or new
messages in your voice mailbox (p. 44), "Ringer off" is not displayed.
• You can adjust the ringer volume while an outside call is ringing. Press [
while the handset is ringing.
Temporary ringer off
While the handset is ringing for an outside call, you can turn the ringer off
temporarily by pressing [OFF]. The handset will ring again as normal the next time
a call is received.
For assistance, please call: 1-800-211-PANA(7262)
Programmable Settings
Handset
] repeatedly until
d

Ringer setting

Back Select
K dB
Ringer volume
Back Select
K dB
Ex. High
Ringer volume
Low High
Back Save
K
dB
] or [
d
L
L
L
]
B
15