Advertisement
Available languages
Available languages
EN
● Visual inspection shall be performed before each use of the stand by checking abnormal condition, such as cracked welds, leaks and damaged, loose, or,
missing parts if stand is believed to have been subjected to abnormal load or shock inspection shall be made by authorized repair facility.
● Equipment that appears damage or worn or operates abnormally shall be removed from service until repair.
● Repair should be made by authorized repair facility.
● Annual inspection of the stand is recommended and should be made by the manufacturer's or supplier's authorized repair facility to ensure that you stand
is optimum conditions and that the stand has correct decals and safety labels specified by the manufacturer.
Assembly Diagram
1
7
6
3
WWW.BORMANNTOOLS.COM
Advertisement
