Table of Contents
Advertisement
Troubleshooting
Problem
You cannot redial by
pressing
(REDIAL/PAUSE)
"Recharge" is displayed,
"
" flashes or the unit
beeps intermittently.
You charged the battery
fully, but "Recharge" is still
displayed and/or "
continues to flash.
The IN USE/CHARGE/HOLD
indicator light does not go
out after the battery has
been charged.
You cannot have a
conversation using the
headset.
If you cannot solve your
problem
56
•If the last number dialed was more than
.
32 digits long, the number will not be
redialed correctly.
•The button has a double function as
either redial or pause. It will redial the
last number dialed if pressed at the
outset of a call (p. 23). If another
number has been dialed first, it will
operate as a pause button (p. 47).
•Charge the battery fully (p. 12).
•Clean the charge contacts and charge
again (p. 13).
•Install a new battery (p. 52).
"
•This is normal.
•Make sure that an optional headset is
connected properly (p. 49).
•
may have been pressed.
If "SP-phone" is displayed on the
handset, press
conversation with the headset.
•Call our customer call center at
1-800-211-PANA(7262).
•Panasonic's e-mail address for customer
inquiries:
consumerproducts@panasonic.com
for customers in the USA or Puerto Rico
ONLY
Remedy
to continue the
Advertisement
Table of Contents
