Table of Contents
Advertisement
en Troubleshooting
Fault
"E:60 / -2B"
lights up.
flashes.
All other error codes.
Malfunctions
Fault
The appliance is not work-
ing.
44
Cause
The unbalanced load detec-
tion system has interrupted
the spin cycle because the
laundry is unevenly distrib-
uted.
The water pressure is low.
The filters in the water inflow
are blocked.
The tap is turned off.
The water inlet hose is
kinked or jammed.
The temperature is too high.
Water level is too high.
Laundry is caught in the
door.
Door is not closed.
Malfunction
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
troubleshooting
Redistribute the laundry in the
▶
drum.
Note: Where possible, mix large and
small items in the drum. Different sized
items of laundry distribute themselves
better during the spin cycle.
No remedial action possible.
Clean the filters in the water inflow
▶
→ Page 41.
Turn on the tap.
▶
Ensure that the water inlet hose is
▶
not kinked or jammed.
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 34
Start the Odpompowanie pro-
▶
gramme.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press
Dodaj pranie to start the
4.
programme.
Close the door.
1.
Press
Dodaj pranie to start the
2.
programme.
Call the after-sales service.
▶
→ "Customer Service", Page 52
troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the
▶
fuse box.
Check whether the lighting in your
▶
kitchen or other appliances are
working.
Advertisement
Table of Contents
