Fujitsu AUXG07-22KVLA Design & Technical Manual page 217

• When function setting is "Operation/Stop" mode 2
– In the case of "Edge" input
Function
setting /
46-03
Indoor unit
– In the case of "Pulse" input
Function
setting /
46-03
Input 1
Input 2
Indoor unit
(R.C. disabled)
Remote controller
NOTES:
• When "Operation/Stop" mode 2 function is used with forming a remote controller group, con-
nect the same equipment to each indoor unit within the group.
11-5. Ceiling type
Rotary SW of
External input and
output PCB
- Input of indoor unit
60-00 / 1
On
Input
Off
Operation
Stop
(R.C. disabled)
Remote controller
Rotary SW of
External input and
output PCB
60-00 / 1
On
Off
On
Off
Operation
Stop
External input
Terminal
External input and
Input 1
output PCB
On
External input
Input 1
External input and
output PCB
Input 2
- 209 -
Input signal Command
Off → On Operation
Stop (R.C.
On → Off
Off → On Operation
Stop (R.C.
On → Off
Off On
Input signal Command
Pulse Operation
Stop (R.C.
Pulse
On Off On
11. External input and output
disabled)
disabled)
disabled)