Starting A Programme With The Delay Start; Setting A Programme - Zanussi ZWF842D1DG User Manual

With the flap in the position DOWN:
• Do not use gelatinous or thick liquid
detergents.
• Do not exceed to liquid detergent dose
indicated on the flap.
• Do not set the prewash phase.
• Do not set the delay start function.
5. Measure out the detergent and the fabric
conditioner.
6. Carefully close the detergent dispenser.
Make sure that the flap does not cause a blockage
when you close the drawer.

SETTING A PROGRAMME

1. Turn the programme dial to select the desired
washing programme.
The indicator of the Start/Pause
The display shows an indicative programme
duration.
2. To change the temperature and/or the spin
speed, touch the related buttons.
3. If desired, set one or more options by touching
the related buttons. The related indicators
illuminate on the display and the given
information changes accordingly.
If a selection is not possible an
acoustic signal sounds and the display
shows
button flashes.
.
STARTING A PROGRAMME
Touch the Start/Pause
programme. It is not possible to start the
programme when the indicator of the button is off
and doesn't flash (e.g. programme dial on a wrong
position).
The related indicator stops flashing and stays on.
The programme starts, the door is locked. The
display shows the indicator
The drain pump can operate shortly
before the appliance fills water.
STARTING A PROGRAMME WITH THE
DELAY START
1. Touch the Delay Start
the display shows the desired delay time. On the
display the indicator shows
2. Touch the Start/Pause
door locks and starts the countdown of the delay
start. The display shows the indicator
When the countdown is completed, the programme
starts automatically.
Cancelling the delay start after the
countdown has started
To cancel the delay start:
1. Touch the Delay Start
until the display shows the desired delay time.
On the display the indicator shows
Touch the Start/Pause
lock the door and starts the countdown of the delay
start. The display shows the indicator
When the countdown is completed, the programme
starts automatically.
2. Touch the Start/Pause
appliance. The related indicator flashes.
3. Touch the Delay Start
until the display shows
goes off.
4. Touch the Start/Pause
the programme immediately.
Changing the delay start after the countdown
has started
To change the delay start:
1. Touch the Start/Pause
appliance. The related indicator flashes.
button to start the
.
button repeatedly until
button. The appliance
.
button repeatedly
button. The appliance
.
button to pause the
button repeatedly
and the indicator
button again to start
button to pause the
19