Advertisement
Dimensions
S50L
Ø50
360°/3-M3 BOLT
Parts Definition/ Installation/ Light Function Selection/ Mounting Hole Specifications
■ Parts Definition/ Installation
Lens(AS)
Reflector
(Heat resistant ABS)
LED unit
Housing(ABS)
Flange nut
• First, remove the flange nuts from bolts and place the
product through the mounting surface holes.
• Fasten the flange nuts on the opposite side of the
mounting surface until the product is tightened securely.
(Units : mm)
PCD 35
Ø9 CABLE ENTRY
Wiring Instructions
Red
Black
White
Black
• External power line - UL1015 AWG18(0.75sq) x 2C 400mm
• This product can be wired regardless of polarity.
■ Light Function Selection
• Please refer to the chart below to use light function selection
switch located inside the product.
▶ L : Steady
• Default function is set at steady LED. Select the desired function
for your application during installation.
■ Mounting Hole Specifications
• Machine holes on the mounting surface referring to the
diagram below.
3-Ø4 HOLES
Min. Ø5 CABLE ENTRY
PCD 35
2
DC
Power
Fuse
AC
Power
Fuse
▶ LF : Flashing
Advertisement
