Table of Contents
Advertisement
en Installation and connection
Connect the water inlet hose to a
2.
tap (26.4 mm = 3/4").
Open the water tap carefully and
3.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
Drainage into a si-
phon.
Secure the connec-
tion point with a (24–
40 mm) hose clamp.
Drainage into a wash
basin.
Fix and secure the wa-
ter outlet hose with an
elbow → Page 26.
16
¾˝
min.
10 mm
Drainage into a plastic
pipe with rubber
sleeve or into a gully.
Fix and secure the wa-
ter outlet hose with an
elbow → Page 26.
Connecting the appliance to the
electricity supply
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Insert the mains plug of the appli-
1.
ance's power cable in a socket
nearby.
The connection details of the appli-
ance can be found under Tech-
nical data → Page 52.
Check the mains plug is inserted
2.
properly.
Aligning the appliance
In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Loosen the lock nuts using a WAF
1.
17 wrench by turning it in a clock-
wise direction.
Advertisement
Table of Contents
