Aligning The Appliance - Bosch WAN28258GB User Manual And Installation Instructions

Table of Contents

Advertisement

Open the water tap carefully and
3.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
against unintentional loosening.
Note: Observe the draining heights.
The maximum draining height is
100 cm.
Siphon
Sink
Plastic pipe with
rubber sleeve or
gully
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Fix and secure
the water outlet
hose with an el-
bow.
→ "Accessories",
Page 27
Fix and secure
the water outlet
hose with an el-
bow.
→ "Accessories",
Page 27
Installation and connection en
Connecting the appliance to the
electricity supply
Note: Your electrical domestic install-
ation for this appliance must comply
with the local legal provisions and
safety regulations, and should in-
clude a residual current circuit-
breaker.
Insert the mains plug of the appli-
1.
ance's power cable in a socket
nearby.
The connection details of the appli-
ance can be found under Tech-
nical data → Page 47.
Check the mains plug is inserted
2.
properly.
4.6 Aligning the appliance
In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.
Use a WAF 17 wrench to loosen
1.
the lock nuts in a clockwise direc-
tion.
15

Advertisement

Table of Contents
loading

Table of Contents