Advertisement
MATERIALS:
FDA approved injection-molded polypropylene with Microban® antimicrobial additive
embedded into the bed surface. Type 304 brushed stainless steel finish veneer. Reinforced
steel-on-steel hinge mechanism and metal mounting chassis with mounting hardware
included. Labelled usage instructions and safety messages in four languages. Optional
Braille label available. Contoured changing surface area is 450 sq. in (2903 sq. cm) and
comes complete with nylon safety strap and bag hooks. Dual cavity liner dispenser holds
approximately 50 KB150-99 bed liners.
OPERATION:
Concealed pneumatic cylinder and metal mounting chassis provides controlled, slow opening
and closing of bed. Polypropylene is easy to clean and resists odors and bacterial growth.
Complies with ASTM static load performance requirements when properly installed.
Warning: To ensure that the unit supports the intended loads, baby changing stations must
be properly installed according to the manufacturer's instructions.
SPECIFICATION:
Baby changing station body shall be durable, injection-molded polypropylene. Design of
unit shall be surface-mounted. Front surface of unit shall have a 304 brushed stainless steel
finish veneer. Unit shall be equipped with a pneumatic cylinder for controlled opening and
closing of bed. Bed shall be secured to metal mounting chassis with a concealed steel-
on-steel hinge. No hinge structure shall be exposed on interior or exterior surfaces. Unit
shall have mounting hardware included. Unit shall have Microban® antimicrobial embedded
into plastic material on the changing surface. Unit shall comply with ADA regulations when
properly installed. Bed shall have smooth concave changing area with a nylon safety
strap and two hooks for bags or purses. The design and manufacture of Koala products
Is intended to be compliant with the 2010 ADA Standards for Accessible Design and the
2009 ICC A117.1, Accessible and Usable Buildings and Facilities. Unit shall conform to
ASTM F 2285-04 Standard Safety Performance Specification for Diaper Changing Tables for
Commercial Use, ANSI Z535.4 Product Safety Signs and Labels, EN 12221:2008, ASTM G22
Antibacterial standards or local code if more stringent installation requirements are applicable
for Barrier-Free accessibility.
Unit shall have a built-in Liner Dispenser for use with 3-ply chemical free biodegradable bed
liners, instructional graphics and safety messages in 4 languages. Optional Braille label is
available. Unit shall be backed by manufacturer's 5-year limited warranty on materials and
workmanship and include a provision for replacement caused by vandalism. Unit shall be
manufactured in the U.S.A.
Advertisement
