Page 1
KOALA KARE PRODUCTS KB200 HORIZONTAL WALL MOUNTED BABY CHANGING STATION KB200-00 CREAM KB200-01 GREY KB200-05 WHITE GRANITE KB200-11 EARTH 3¾” (95 mm) 16” (406 mm) ” between holes (500 mm) ” (461 mm) 42¼” (1,073 mm) to floor ” (894 mm)
Page 2
” (489 mm) liner dispenser dimensions when attached 16” (406 mm) 5½” (140 mm) 4½” 42¼” (1073 mm) (114 mm) from top mounting 3¾” hole to floor (95 mm) Floor ” (894 mm) 22¼” (565 mm) 44” 33” ” (1118 mm) (838 mm) (589 mm) from floor to...
Page 3
MATERIALS: FDA approved injection-molded polypropylene with Microban® antimicrobial additive embedded into the bed surface. Reinforced steel-on-steel hinge mechanism and metal mounting chassis with mounting hardware included. Labelled usage instructions and safety messages in four languages. Optional Braille label available. Contoured changing surface area is 450 sq.
Page 4
1. Remove changing station from the shipping container and check for any freight damage. If damage is found, please call Koala Kare Products’ Customer Service at 888.733.3456. Remove “Installation Kit” and “Operator Kit” from box. Please give “Operator Kit” to facility manager or operator.
Need help?
Do you have a question about the KB200-00 and is the answer not in the manual?
Questions and answers