Sony SRS-XB32 Help Manual page 68

Hide thumbs Also See for SRS-XB32:

Table of Contents

Adjust the volume by pressing the –/+ (volume) buttons on the speaker or operating the BLUETOOTH

mobile phone.

When you press the –/+ (volume) buttons on the speaker or adjust the volume on the BLUETOOTH mobile phone,

the

(power) indicator flashes once.

When you set the volume to the maximum or minimum level on the speaker, the

times.

To end a call, press the

If you were listening to music before the call, playback will resume when the call ends. If you end a call by operating

the BLUETOOTH mobile phone, playback will also resume when the call ends if you were listening to music before

the call.

Hint

If the caller cannot hear or can barely hear your voice, talk more directly into the microphone of the speaker.

The volume of music playback and calling is set independently in the speaker.

Note

For Apple iOS devices, the unit is compatible with iOS 10.0 or later. A BLUETOOTH connection is not available on the devices

with iOS 9.x or earlier.

When using the Speaker Add function or Wireless Party Chain function, the sound of the phone call is output from only the

speaker in which the

The sound is output only from the right speaker unit during a call.

Depending on the BLUETOOTH mobile phone, playback may not pause when making a call.

Use a BLUETOOTH mobile phone at least 50 cm (1.6 ft) away from the speaker. Noise may result if the speaker and the

BLUETOOTH mobile phone are too close.

When an audio cable is connected to the AUDIO IN jack of the speaker, you cannot listen to music of the BLUETOOTH device.

However, when the BLUETOOTH connection is active, the hands-free function is available.