Double Mode; Stereo Mode - Sony SRS-XB32 Help Manual

Hide thumbs Also See for SRS-XB32:

Table of Contents

Help Guide

Wireless Speaker

SRS-XB32

Listening to music wirelessly with 2 speakers (Speaker Add function)

To use the Speaker Add function, 2 SRS-XB32 speakers are required. By connecting 2 speakers via BLUETOOTH

connection, you can enjoy more powerful sound.

Select from the following 2 playback methods.

For Apple iOS devices, the unit is compatible with iOS 10.0 or later. A BLUETOOTH connection is not available on the

devices with iOS 9.x or earlier.

Double mode

Both speakers play the same sound. Double mode is the initial setting.

One speaker plays the sound on the right channel (right side), while the other speaker plays the sound on the left

channel (left side) for stereo playback between the speakers.

Place 2 speakers within 1 m (3.2 ft) each other, and then turn on both speakers.

The

(power) indicator lights up.

The

(BLUETOOTH) indicator flashes.

If the BLUETOOTH device which has been connected before is nearby, the speaker may be connected to the

device automatically, and then the

function on the BLUETOOTH device or turn off the BLUETOOTH device.

Press the ADD (Speaker Add) button inside the cap on the rear side of one of the 2 speakers.

A beep is heard, and the

seconds, a beep sounds, and the ADD (Speaker Add) indicator stays lit.

(BLUETOOTH) indicator may be lit. In this case, turn off the BLUETOOTH

(BLUETOOTH) indicator and ADD (Speaker Add) indicator flash. After about 3 to 5

Table of Contents