Sony SRS-XB32 Help Manual page 20

The speaker is searching for a BLUETOOTH device.
To pair a BLUETOOTH device you have not registered (paired) before, proceed to step
To reconnect to the BLUETOOTH device that has been registered (paired), proceed to step
will automatically be connected just by turning on the BLUETOOTH function on the smartphone/iPhone.
Depending on the BLUETOOTH device, it may be reconnected just by turning on the power to the speaker. For
details, refer to the operating instructions supplied with the BLUETOOTH device.
When the indicator stays lit
The speaker has been connected to the BLUETOOTH device.
To connect to other BLUETOOTH deivces, follow one of the procedures below.
To pair a BLUETOOTH device you have not registered (paired) before, proceed to step
To reconnect to the BLUETOOTH device that has been registered (paired), proceed to step
will automatically be connected just by turning on the BLUETOOTH function on the smartphone/iPhone.
Press and hold the
3
(BLUETOOTH) indicator begins to flash quickly in blue.
The speaker enters pairing mode.
(power)/ PAIRING button until you hear the voice guidance and the
20
.
. The speaker
.
. The speaker