Table of Contents
Advertisement
USING YOUR HEATER
OSCILATING FUNCTIONS
Tap the oscillating button to start and stop the oscillating
function.
HIGH TEMPERATURE PROTECTION
When the ambient temperature exceeds 50℃, the output will
cease. The "1h, 2h and 4h" indicator lights will flash together
and the buzzer will sound 10 times.
To reset the heater, the ambient temperature must be lower
than 50℃, and be rebooted.
TEMPERATURE SENSOR FAULTS
When there is an open circuit fault with the temperature
sensor, under any working mode, the "1h" indicator light will
flash repeatedly and the buzzer sound 10 times
When there is a short circuit fault with the temperature
sensor, the "2h" indicator light will flash repeatedly and the
buzzer sound 10 times
ECO FUNCTION
The default setting temperature is 24 ℃ when in ECO energy-
mode. The speed will be selected automatically based on the
ambient temperature and chosen setting temperature.
TIP OVER SWITCH
The appliance needs to be placed on a flat, firm and stable
surface. In the event that the unit tips over or is placed on an
uneven or very soft surface the "1h, 2h" lights will flash and the
buzzer will sound 10 times. The machine will shut down
automatically and require restarting.
10
Advertisement
Table of Contents
