Recordings - Axis F9104-B User Manual

AXIS F9104-B Main Unit
The device interface
To upload an image, click Images. Before you upload an image, you can choose to:
-
-
• Streaming indicator
indicates that the video stream is live, even if the scene doesn't contain any motion.
-
-
-
Privacy masks
: Click to create a new privacy mask. The maximum number of masks depend on the complexity of all masks combined.
Each mask can have maximum 10 anchor points.
Privacy masks: Click to change the color of all privacy masks, or to delete all privacy masks permanently.
Cell size: If you choose mosaic color, the privacy masks appear as pixilated patterns. Use the slider to change the size of the pixels.
Mask x: Click to rename, disable, or permanently delete the mask.

Recordings

Click to filter the recordings.
From: Show recordings done after a certain point in time.
To: Show recordings up until a certain point in time.
Source : Show recordings based on source.
Event: Show recordings based on events.
Storage: Show recordings based on storage type.
Ongoing recordings: Show all ongoing recordings on the camera.
Select to start a recording on the camera.
Choose which storage device to save to.
Select to stop a recording on the camera.
Triggered recordings will end both when manually stopped and when the camera is shut down.
Continuous recordings will continue until manually stopped. Even if the camera is shut down, the recording will continue
when the camera starts up again.
Scale with resolution: Select to automatically scale the overlay image to fit the video resolution.
Use transparency: Select and enter the RGB hexadecimal value for that color. Use the format RRGGBB.
Examples of hexadecimal values: FFFFFF for white, 000000 for black, FF00000 for red, 6633FF for blue, and
669900 for green. Only for .bmp images.
: Select to show an animation superimposed over the video stream. The animation
Appearance: Select the animation color and background color, for example, red animation on a transparent
background (default).
Size: Select the desired font size.
: Select the position of the overlay in the image.
22