LG LP0522WSR Owner's Manual page 19

Power ( )
1
Turns the air conditioner on and off.
A chime sounds to confirm you have turned
it on or off.
Mode
2
Press this button repeatedly to toggle
through and select the operating mode.
Modes include Cool, Dry (dehumidify), Fan,
and Heat. An LED illuminates to indicate the
selected mode. The default mode is Cool.
Cool
Compressor runs and cools the room. Use
the ∧/∨ and Fan Speed buttons to set the
desired temperature and fan speed.
Dry
Use the Dry mode to remove humidity from
the room without additional cooling. The fan
speed is preset and cannot be adjusted.
Fan
Fan circulates air but compressor does not
run. Use the Fan Speed button to set the
desired fan speed to either High, Mid, Low.
Heat
Compressor runs and heats the room. Use
the ∧/∨ and Fan Speed buttons to set the
desired temperature and fan speed.
NOTE
• To protect the compressor, the fan and
compressor may stop for a short time if
you switch modes from Cool to Heat or
vice versa.
• When Auto of Fan mode is selected in
LG ThinQ application, it operates as
the previous setting fan speed.
Temperature Control ∧/∨
3
In Cool, Dry and Heat mode, the ∧/∨
buttons adjust the set temperature up to
86 °F (30 °C) or down to 60 °F (16 °C), in
one-degree increments.
NOTE
• To switch the temperature units on the
display between Fahrenheit (°F) and
Celsius (°C), press and hold the ∧ and
∨ buttons on the control panel at the
same time for 5 seconds.
Fan Speed
4
Press repeatedly to toggle the fan speed
between Auto, High, Mid, and Low
settings. An LED illuminates to indicate
the selected fan speed. The fan speed can
be changed in the Cool, Fan, and Heat
modes. The fan speed is preset in the Dry
mode. After pressing the button, there is a
brief delay before the fan motor changes
speed.
Timer
5
Delay ON - When the air conditioner is off,
set it to automatically turn on from 1 to 24
hours later, at its previous mode and fan
settings.
Delay OFF - When the air conditioner is
on, set it to automatically turn off from 1 to
24 hours later.
NOTE
• Each press of the Timer button advances
the timer by 1 hour. Once you have
finished setting the Delay OFF Timer, the
display returns to the temperature setting
after a short delay.
• To cancel the Timer function, press the
Timer button on control panel or press
the clear button on the remote control.
OPERATION
19