Table of Contents
Advertisement
Type B screw
Type C screw
5
Drive B screw and C screw to secure the
window.
NOTE
• For a tighter seal, use "no residue" duct tape (not provided) to seal any gaps around the installed
panel assembly, around the diffuser, and between the sashes.
• For best results, keep the vent hose as short and straight as possible. However, shape the diffuser
end of the vent hose into an inverted U shape just inside the window to allow any rain or
condensation to drain out the window.
Best positioning
6
Connect the window panel to the diffuser.
Ensure that all connections are tight and
installed properly.
Inverted U shape
INSTALLATION
15
Advertisement
Table of Contents
