Table of Contents
Advertisement
en first time
Set the slider to ON or OFF.
2.
Push in the top basket.
3.
Cleaning Extra Clean Zone
Limescale and soiling from the dish-
washing water can block the nozzles.
Note: Always operate the appliance
with the Extra Clean Zone fitted.
Pull out the top basket.
1.
Pull the tab on the Extra Clean
2.
Zone up
and forwards
Set the slider to ON.
3.
Clean under running water.
4.
24
Place the Extra Clean Zone in the
5.
top basket and lock in place
Check that the mounts are in the
correct position.
a The Extra Clean Zone audibly
clicks into position
Push in the top basket.
6.
first time
9 Before using for the
.
first time
9.1 Performing the initial con-
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
Requirement: The appliance has
been installed and connected.
→ Page 12
Add special salt. → Page 26
1.
Add rinse aid. → Page 27
2.
Switch on the appliance.
3.
→ Page 32
Setting the water softening system.
4.
→ Page 25
Set the amount of rinse aid to be
5.
dispensed. → Page 27
first time
figuration
.
.
Advertisement
Table of Contents
