Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch SMS6HMI27Q
Summary of Contents for Bosch SMS6HMI27Q
- Page 1 Dishwasher SMS6HMI27Q [en] User manual...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Folding prongs ....... 23 General information...... 4 Basket heights........ 23 Intended use........ 4 Before using for the first time .. 24 Restriction on user group.... 4 Performing the initial configura- Safe installation ........ 5 tion.......... 24 Safe use ........... 6 Damaged appliance ...... 7 Water softening system.... - Page 3 Basic settings........ 35 Technical specifications.... 57 Overview of basic settings ..... 35 Information regarding Free and Open Source Software .... 58 Changing basic settings.... 36 Home Connect ...... 37 Home Connect quick start ..... 37 Home Connect settings.... 38 Remote Start ....... 38 Remote Diagnostics ...... 38 Software update ...... 38 Data protection....... 38 Cleaning and servicing ....
-
Page 4: Safety
en Safety Safety Please read the safety information to ensure that you use the ap- pliance safely. General information ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. -
Page 5: Safe Installation
Safety en Safe installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of injury! Improper installation may cause injury. ▶ When installing and connecting the appliance, follow the in- structions in the manual and installation instructions. WARNING ‒ Risk of electric shock! ¡... -
Page 6: Safe Use
en Safety ▶ Only use adapters approved by the manufacturer. WARNING ‒ Risk of burns! If the appliance is not installed properly, this may result in burns. ▶ With free-standing appliances, ensure that they are installed with the back panel against a wall. Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for... -
Page 7: Damaged Appliance
Safety en ¡ Knives and utensils with sharp points can cause injuries. ▶ Arrange knives and utensils with sharp points in the cutlery basket with the points downwards, on the knife shelf or in the cutlery drawer. WARNING ‒ Risk of scalding! If you open the appliance door while the programme is run- ning, hot water may splash out of the appliance. -
Page 8: Risk To Children
en Safety ▶ Never pull on the power cord to unplug the appliance. Al- ways unplug the appliance at the mains. ▶ If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box and turn off the water tap. - Page 9 Safety en WARNING ‒ Risk of crushing! With higher-level appliances, children can become crushed between the appliance door and cabinet doors underneath. ▶ Keep an eye on children when opening and closing the ap- pliance door. WARNING ‒ Risk of chemical burns! Rinse aid and detergent may cause chemical burns to the mouth, throat and eyes.
-
Page 10: Preventing Material Damage
en Preventing material damage Only use the water hoses sup- ▶ Preventing material damage Preventing material dam- plied with the appliance or genu- ine spare hoses. Never re-use water hoses that ▶ have been used before. Preventing material damage Safe installation ¡... -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en So as not to scratch the finish Change the sensor setting to the de- ▶ on the appliance, do not use fault. sponges with a rough surface or Consumption is reduced. abrasive cleaning agents. → "Sensors", Page 11 To prevent corrosion, do not use ▶... -
Page 12: Installation And Connection
en Installation and connection ¡ Mains cable Sensor setting Description ¡ Quick reference guide SE:01 Adjusts the programme strength for effective re- Installing and connecting the moval of food remnants appliance even with low soiling levels. Energy and water You can position your built-under or consumption are adjusted integrable appliance in a fitted kit- accordingly. -
Page 13: Drinking Water Connection
Installation and connection en Connect the wastewater hose to ¡ Please note that the water safety the outlet connection of the siphon system is only functional if there is using the enclosed parts. a power supply. When doing so, check that the Insert the non-heating appliance wastewater hose is not kinked, plug of the power cable into the... -
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 57. -
Page 15: Controls
Familiarising yourself with your appliance en "Detergent" → Page 28 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 21 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 24 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 16 en Familiarising yourself with your appliance "Switching on the appliance" → Page 32 ON/OFF button and reset button "Switching off the appliance" → Page 34 "Terminating the programme" → Page 34 "Programmes" → Page 18 Programme buttons Programme sequence display The programme sequence display shows the cur- rent cycle of the appliance, e.g. washing, rinsing or drying.
- Page 17 Familiarising yourself with your appliance en Water supply display Display for water supply "Water softening system" → Page 24 Special salt refill indicator Door opener Opening the appliance door Depending on the appliance specifications...
-
Page 18: Programmes
en Programmes Programmes Programmes You can find an overview of the pro- ning time will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 19: Information For Test Institutes
Programmes en Programme Programme sequence Additional func- tions Tableware: Reduced noise: → "Additional ¡ Cleaning mixed table- ¡ Pre-Rinse Silence 50 ware and cutlery. functions", ¡ Cleaning 50 °C Level of soiling: Page 20 ¡ Intermediate rinse ¡ Removing common ¡ Final rinse 63 °C household food remnants ¡... -
Page 20: Additional Functions
en Additional functions The product number (E-Nr.) and the Additional func- production number (FD) are required tion here. They can be found on the rat- ¡ To ensure a higher hy- ing plate on the appliance door. giene status for the ap- Hygiene+ pliance and tableware, the temperature is... -
Page 21: Top Basket
Features en Raise or lower the basket evenly to Top basket the right level. Arrange cups and glasses in the top → "Basket heights", Page 23 basket. Check that the basket is level on both sides. You can adjust the height of the top Slide the basket back in. -
Page 22: Cutlery Basket
en Features Cutlery drawer Arrange cutlery in the cutlery drawer. Large plates up to a diameter of 31 cm can be arranged in the bottom basket as shown. Arrange cutlery with the points and sharp edges downwards. Etagere Use the cutlery shelf and space un- derneath for small cups and glasses or for large items of cutlery, e.g. -
Page 23: Folding Prongs
Features en Folding down prongs Folding prongs If you do not need the prongs, fold Use the folding prongs to position them down. tableware securely, e.g. plates. Push the lever forwards and fold down the prongs . You can fold the prongs down to po- sition pans, bowls and glasses To use the prongs again, fold them better. -
Page 24: Before Using For The First Time
en Before using for the first time "Set the amount of rinse aid to be Before using for the first time Before using for the dispensed." → Page 27 first time "Add detergent" → Page 28. Start the Programme with the Configure the settings for initial start- Before using for the first time highest cleaning temperature without tableware. -
Page 25: Setting The Water Softening System
Water softening system en Water hardness °E Hardness range mmol/l Setting value 39 - 62 Hard 5.5 - 8.9 H:07 Note: Set the water hardness determ- ter hardness: the higher the water ined on your appliance. hardness, the greater the amount of → "Setting the water softening sys- special salt required. -
Page 26: Switching Off The Water Softening System
en Rinse aid system Note: Only use special salt for erally only be used up to a water dishwashers. hardness of 26 °E without adding Do not use salt tablets. special salt. Do not use table salt. ¡ The water hardness is 0 - 8 °E. You do not need to use special Add the special salt to the dis- salt. -
Page 27: Setting The Amount Of Rinse Aid
Rinse aid system en a The display shows . Press the catch on the lid of the dispenser for rinse aid and lift Press repeatedly until . the display shows the value set at the factory r:05. Press repeatedly until the right amount of rinse aid has been set. -
Page 28: Detergent
en Detergent Detergent Description Detergent Detergent Liquid detergent Liquid detergent works faster and is recommen- Find out which detergents are suit- Detergent ded for shorter "Pro- able for your appliance. grammes" → Page 18 Suitable detergents without PreRinse. Sometimes liquid deter- Only use detergents that are suitable gent may leak out despite for dishwashers. -
Page 29: Unsuitable Detergents
Detergent en depending on the combination (4in1, ¡ According to manufacturers, com- 5in1, ...), additional components such bined detergents with salt replace- as glass protection or stainless steel ment substances can only be used cleaner. up to a certain water hardness, According to manufacturers, com- usually 26 °E, without adding spe- bined detergents generally only func- cial salt. -
Page 30: Tableware
en Tableware Add the detergent to the dry deter- Close the lid of the detergent dis- gent dispenser. penser. 50 ml 25 ml 15 ml a The lid clicks into position. If you are using tablets, one is a The detergent dispenser will open enough. -
Page 31: Damage To Glass And Tableware
Tableware en Damage to glass and table- Cause Recommendation ware The water temperat- Select a programme ure of the programme with lower temperat- Avoid damage to glass and table- is too high. ures. ware. After the programme has ended, take glass- Cause Recommendation ware and cutlery out... -
Page 32: Removing Tableware
en Basic operation To save resources, do not pre- Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin. -
Page 33: Setting Additional Functions
Basic operation en ¡ You can only change a pro- Setting additional functions gramme when running if you can- You can set additional functions to cel it. complete the washing programme → "Terminate programme", selected. Page 34 ¡ The appliance switches off auto- Note: The additional functions which matically 1 minute after the end of can be used depend on the pro-... -
Page 34: Terminate Programme
en Basic operation Terminate programme To end a programme early or to switch from a programme that has already started, you will need to can- cel it first. Press for approx. ▶ 4 seconds. a All displays light up. a As soon as the displays are off, the display shows "00h:01m"... -
Page 35: Basic Settings
Basic settings en Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H:04 H:00 - H:07 Set the water softening system to your water hardness. -
Page 36: Changing Basic Settings
en Basic settings Basic setting Display text Selection Description Start programme SP:01 SP:00 - SP:01 Set a default programme for when the appliance is switched on. ¡ With the setting "SP:00", the last programme selected is set by de- fault when the appliance is switched on. -
Page 37: Home Connect
Home Connect en To save the settings, press Home Connect quick start for 3 seconds. Connect your appliance to a mobile device quickly and easily. Home Connect Home Connect Installing app Install the Home Connect app on This appliance is network-capable. Home Connect your mobile device. Connect your appliance to a mobile device to control its functions via the Home Connect app. -
Page 38: Home Connect Settings
en Home Connect Home Connect settings Remote Diagnostics Adapt Home Connect to your needs. Customer Service can use Remote You can find the Home Connect set- Diagnostics to access your appliance tings in the basic settings for your ap- if you contact them, have your appli- pliance. -
Page 39: Cleaning And Servicing
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.bosch-home.com/ mend cleaning your appliance at reg- store or from customer service. ular intervals. Machine Care is a programme which... - Page 40 en Cleaning and servicing Phase Removal of Detergent Placement Grease and limescale Liquid machine care product Appliance interior, e.g. bottle or machine descaler in hung in the cutlery basket or powder form. powder in the interior. Food remnants and de- Machine cleaner Detergent dispenser posits To ensure optimum cleaning perform-...
-
Page 41: Filter System
Cleaning and servicing en Pull down the micro filter to re- Filter system move. The filter system removes coarse soiling from the dishwashing cycle. Press the locking catches gether and lift the coarse filter out . Micro filter Fine filter Coarse filter Cleaning filters Soiling in the dishwashing water may... -
Page 42: Cleaning Spray Arms
en Cleaning and servicing Cleaning spray arms Limescale and soiling in the dish- washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove . Pull up the lower spray arm to re- move. -
Page 43: Troubleshooting
Troubleshooting en Troubleshooting Troubleshooting Troubleshooting WARNING Risk of electric shock! Incorrect repairs are dangerous. Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be replaced with a ▶ special connection cable, which is available from the manufacturer or his Customer Service. - Page 44 en Troubleshooting Fault Cause Troubleshooting E:32-00 will light up altern- Remove the filter from the supply ately or indicator for water hose supply lights up. Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
-
Page 45: Washing Results
Troubleshooting en Fault Cause Troubleshooting A different error code ap- A technical fault is present. Press . pears in the display window. Unplug the appliance or switch off the fuse. E:01-00 to E:90-10 Wait at least 2 minutes. Insert the mains plug of the appli- ance in a socket or switch on the fuse. - Page 46 en Troubleshooting Fault Cause Troubleshooting Tableware is not dry. Use a different combined detergent with a better drying performance. Extra Dry not activated to im- Activate Extra Dry. ▶ prove drying performance. Tableware removed too Wait until the programme ends. early or drying process not Only remove tableware 30 minutes yet ended.
- Page 47 Troubleshooting en Fault Cause Troubleshooting Remnants of food on table- Washing programme selec- Select a more intensive washing ▶ ware. ted too weak. programme. → "Programmes", Page 18 Adjust the sensitivity of the sensors. ▶ → "Sensors", Page 11 Tableware has been pre- Only remove large remnants of food ▶...
- Page 48 en Troubleshooting Fault Cause Troubleshooting Water marks on plastic Due to laws of physics Select a more intensive pro- ▶ parts. droplet formation on plastic gramme. → "Programmes", Page 18 surfaces is unavoidable. After drying water marks are Position tableware at an angle. ▶...
- Page 49 Troubleshooting en Fault Cause Troubleshooting Tea residue or lipstick marks Washing temperature is too Select a programme with a higher ▶ on tableware. low. washing temperature. → "Programmes", Page 18 Too little detergent is being Use a suitable "Detergent " ▶ → Page 28 and follow the manufac- used or is unsuitable.
- Page 50 en Troubleshooting Fault Cause Troubleshooting Plastic parts are discol- Washing temperature is too Select a programme with a higher ▶ oured. low. washing temperature. → "Programmes", Page 18 Tableware has been pre- Only remove large remnants of food ▶ cleaned too intensely. The and do not prerinse tableware.
-
Page 51: Home Connect Problem
Troubleshooting en Fault Cause Troubleshooting Rust spots on cutlery. Cutlery is not sufficiently Use rust-resistant tableware. ▶ rust-resistant. Knife blades are often more severely af- fected. Cutlery may also rust if Do not wash rusting items. ▶ washed together with rust- ing items. -
Page 52: Information On Display Panel
en Troubleshooting Information on display panel Fault Cause Troubleshooting Add "Special salt" → Page 25. Special salt refill indicator Insufficient special salt. ▶ lights up. Sensor does not detect spe- Do not use special salt tablets. ▶ cial salt tablets. Refill indicator for special Water softening system is Setting the water softening system ▶... -
Page 53: Mechanical Damage
Troubleshooting en Fault Cause Troubleshooting → "Terminate programme", Programme starts automat- You did not wait until pro- ▶ ically. gramme ended. Page 34 Appliance stops during the Appliance door is not closed Close the appliance door. ▶ programme or cuts out. properly. Power and/or water supply Check the power supply. - Page 54 en Troubleshooting Fault Cause Troubleshooting Knocking or rattling noise. Load the appliance with more table- ▶ ware. Light items of tableware Position light items of tableware se- ▶ move about during the wash curely. cycle.
-
Page 55: Clean Wastewater Pump
Transportation, storage and disposal en Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 56: Protect Appliance From Frost
en Customer Service Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 57: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
Technical specifications en If you contact Customer Service, you ory). Our guarantee does not cover will require the product number (E- defective supply lines or fittings up Nr.), the production number (FD) and to the Aqua-Stop connection on the consecutive numbering (Z-Nr.) of the tap. - Page 58 en Technical specifications Water pressure ¡ Min. 0.05 MPa (0.5 bar) ¡ Max. 1 MPa (10 bar) Inlet rate Min. 10 l/min Water temperature Cold water. Hot water max.: 60 °C Capacity 13 place settings Information regarding Free and Open Source Software This product includes software com- ponents that are licensed by the copyright holders as free software or open source software.
- Page 60 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.
Need help?
Do you have a question about the SMS6HMI27Q and is the answer not in the manual?
Questions and answers