Advanced Option Menu - Philips 75BDL3000U User Manual

75BDL3000U
Monitor information
Model name
Serial no
Operation hours
SW Version
DP Version
The option are: {DP 1.1} / {DP 1.2} / {DP 1.2 multi}. The default is {DP
1.1}.
Human sensor
Set the display to turn on backlight if it does sensor human and turn off
backlight after an amount of time specified
The options are: {Off, 10 ~ 60} minutes.
HDMI edid
The option are: {HDMI 1.4} / {HDMI 2.0}. The default is {HDMI 1.4}.
NOTE: HDMI 2.0 option is to support HDMI 2.0 equipment use.
Image rotation
Set the picture of main Window to rotate 270 degrees.
The options are: {Off} (default) / {On}.
Power LED light
Choose to control the power LED.
The options are: {Off} / {On} (default).
Configuration2 reset
Reset all settings in Configuration2 menu to the factory preset values.

5.2.7. Advanced option menu

Input resolution
Configuration 2
IR control
Keyboard control
Advanced option
Tiling
Date and time
Input
Off timer
Schedule
DDC/CI
HDMI with One Wire
Auto signal detection
Input resolution
Set the resolution of the VGA input. This is only required when the
display is unable to detect the VGA input resolution correctly.
NOTE: T his item is functional for VGA input only.
The options are:
• {1024x768 / 1280x768 / 1360x768 / 1366x768}
• {1400x1050 / 1680x1050}
• {1600x1200 / 1920x1200}
• {Auto}: Determines the resolution automatically.
The selected settings will become effective after turning off the power
and turning it on again.
75BDL3000U
CNCA123456789
46H45M
V0.300
Auto
Action
Action
Action
Action
Off
Action
On
Off
Action
IR control
Select the operation mode of the remote control when multiple
displays are connected via an RS232C connection.
• {Normal} - All displays can be operated normally by the remote
control unit.
• {Primary} - Designate this display as the primary display for remote
control operation. Only this display can be operated by the remote
control.
• {Secondary} - Designate this display as the secondary display. This
display can not be operated by the remote control, and will only
receive the control signal from the primary display via the RS232C
connection.
• {Lock All} / {Lock all but Volume} / {Lock all but Power} - Lock the
remote control function of this display. To unlock, press and hold the
[ ] INFO button on the remote control for 5 (five) seconds.
NOTE: A fter the main OSD menu vanished, the Primary / Secondary
OSD will be displayed for 3 seconds. Or, press [OK] button
to display the Primary / Secondary OSD when no other OSD.
1. During the Primary OSD, press [ ] or [ ] button to adjust the
value of {Control Monitor ID}, and press [ ] or [ ] button to adjust
the value of {Control Group ID}.
Keyboard control
Choose to enable or disable the display keyboard (control buttons)
function.
• {Unlock} - Enable the keyboard function.
• {Lock All} / {Lock all but Volume} / {Lock all but Power} - Disable
the keyboard function.
NOTE: T o enable or disable the keyboard control lock, press both [
] and [ ] buttons and hold down continuously for more than
3 seconds.
Tiling
With this function you can create a single large-screen matrix (video
wall) that consists of up to 150 sets of this display (up to 10-sets on the
vertical and 15-sets on the horizontal sides). This function requires a
daisy-chain connection.
Tiling
H monitors
V monitors
Position
Frame comp.
Enable
Switch on delay
22
1
1
1
No
No
Off