Sony RM-LP204M Operating Instructions Manual page 19

Using t he aut o pow er f unct ion
With the auto power function turned on, the commander
sends numerous codes to the appropriate Sony AV
components when you select a video function.
Automatically, the components and the TV you have done
IR setting turn on and the TV switches to the selected
input mode. This function works for Sony components
only.
1
Press SET UP .
The set up list appears.
2
M ove the easy scroll key to select "AUTO POWER",
then press the key to enter the selection.
The AUTO POWER list appears .
<AUTO POWER>
ON
OFF
3
M ove the easy scroll key to select "ON" or "OFF",
then press the key to enter the selection.
4
When you select "ON", move the easy scroll key to
select the video input of the TV, then press the key
to enter the selection.
<TV INPUT>
TV-VIDEO1
TV-VIDEO2
Note
Switching to VIDEO 1~4 input may not be automatic on all Sony
TVs. This is because some TVs cannot receive remote control
codes immediately after being turned on.
Downloaded from: https://www.usersmanualguide.com/
19