LG 27HK510S Owner's Manual page 18

[All Settings] > [Input]
[Aspect Ratio]
[PBP / PIP]
[PIP Size]
[Main/Sub Screen Change]
[Failover Input Switch]
NOTE
• If not using the [PBP / PIP] feature, [PIP Size], [Main/Sub Screen Change] are deactivated.
• [Failover Input Switch] feature only supports digital signal.
18
Adjusts the aspect ratio of the screen. ([Full Wide], [Original], [Just Scan])
NOTE
• The display may look the same for [Full Wide], [Original] and [Just Scan] options at the recommended resolution (1920 x 1080).
[Main Aspect Ratio] [Full Wide] Displays the image to fit the PBP / PIP screen, regardless of the video signal input.
[Original] Displays on the PBP / PIP screen in the aspect ratio of the video signal input.
[Sub Aspect Ratio] [Full Wide] Displays the image to fit the PBP / PIP screen, regardless of the video signal input.
[Original] Displays on the PBP / PIP screen in the aspect ratio of the video signal input.
Adjusts display mode for 2 or more screens.
Adjusts the size of PIP. ([Small], [Medium], [Large])
Converts between the Main and the Sub in the [PBP / PIP] mode.
[Main input] is changed to [Failover Input] when there is no signal at the [Main Input].
[Failover Input Switch] The [Failover Input Switch] input will be operated or turned off.
[Main Input] Select [Main Input] source.
[Failover Input] Select [Failover Input] source.
Explanation