Setting the anti-tip bracket:
Units are equipped with an anti-tip brack-
et. The anti-tip bracket is located on the
lower front corner of the cabinet, on the
lower hinge bracket. After fully leveling
the unit, lower the anti-tip foot by turning
it clockwise until is securely contacts the
floor. Do not raise the cabinet.
Lower
Anti-tip Bracket
WARNING
The anti-tip device must be
installed according to the
instructions in your Use &
Care Manual. Failure to do
so may result in injury.
Lower Hinge Adjustment for Leveling
the Doors of the Matching Refrigerator /
Freezer Pair
To level the doors using the adjustable
lower hinge (some models):
If the refrigerator door is lower than the
freezer door, raise the refrigerator door
by turning the adjustment screw counter-
clockwise using a 19mm socket wrench.
(See illustration below.)
If the freezer door is lower than the
refrigerator door, raise the freezer door
by turning the adjustment screw counter-
clockwise using a 19mm socket wrench.
(See illustration below.)
INSTALLATION
Freezer Hinge
Adjustment
Door
Raise
Door
Freezer
Guidelines for final positioning of
your appliance:
•
Rest all bottom leveling feet firmly on
a solid floor.
•
The cabinet should be level on all sides.
•
The door should be level.
Pairing Installation
Pairing kit (TWINSPAIRKIT) is REQUIRED
if you are installing the following
appliances next to each other:
•
Freezer and Refrigerator
•
Freezer and Freezer
•
Refrigerator and Refrigerator
To obtain this kit, please contact the
retailer where you purchased your
appliances, or contact Frigidaire customer
service at 1-800-374-4432 in the US,
1-800-265-8352 in Canada.
9
Door
Raise
Door
Refrigerator