E-Net E-P132-X User Manual page 24

Field Description
□
□ System time elapsed
□
The time elapsed since start in this device [Day Hour: Minute: Second]
format. This information can be useful identifying reliability of system.
□
□ Firmware version
□
Converter firmware identified by date code. This information will be required
looking for technical support.
□
□ Serial number
□
Converter consisted "Type Number (5 digits) and unique MAC (Media
Access Control) address used by Ethernet in hex format, 8 digits.
□
□ Password
□
(Setup Login)
This field is administration password for authentication. Factory is default
"empty". However, it is not recommended to leave empty in field operation.
If you could not login, it means you have to key the password. If you do not
know the password you can turn off the power and then use any point tip to
press "Reset" button and hold it to turn on the power. The password will be
reset to the factory default as "empty".
E-P132-X TCP/IP converter uses the same password protection mechanism
commonly used Windows NT or UNIX. If there are more than "3
consecutive failures" in password check during login, the login function will
be disabled for "15 minutes". During this 15 minutes period, if you supply a
correct password, login will not proceed. This prevents intruder from finding
the password by computer generated program.
24