Table of Contents
Advertisement
Press ENTER or select [IP Address] in the [Config] menu, a dialog will be
shown (see Figure 3.4).
Note: Because ETM uses broadcast UDP packets for sake of security, it
allows configuration only when setup the device password is empty.
(Figure 3.4)
(Figure 3.4)
Assign IP Address with same Subnet Mask of your computer, avoiding any
IP conflict with other network devices.
When you press [Ok] button, IP address will be refreshed in 2~3 seconds.
(See the Figure 3.5.)
(Figure 3.5)
21
Advertisement
Table of Contents
