How To Use An Easy Adjust Type Clasp - Seiko Prospex SPB257J Instruction Manual

C
C Type
2
● How to wear or take off the watch
Press the push buttons on both sides of the
1
flap; pull the buckle up. The band will
automatically come out of the loop.
Buckle
Push button
Fixed loop
Movable loop
Flap
29
EN
Pull the pin out of a adjustment hole of the
3
band. Slide the band to adjust its length and
find an appropriate hole. Place the pin into the
2 hole.
Pin
Adjustment hole
Adjustment hole
Pin
31
EN
Place the tip of the band into the movable loop
2
and fixed loop, and fasten the clasp by
pressing the frame of the buckle.
Fasten the flap.
4
● How to adjust the length of the band
Press the push buttons on both sides of the
1
flap; pull the buckle up. The band will
automatically come out of the loop.
Buckle
Push button
Fixed loop
Movable loop
Flap

How to use an easy adjust type clasp

Some bands are provided with an easy adjust type clasp for fine adjustment of the band's length.
If the clasp of the watch you purchased is as follows, please refer to the following instructions.
* The band can be lengthened by up to about 5 mm.
This is useful if the band feels too tight or is uncomfortable for some reason.
Press the push buttons again to unfasten the
2
flap.
EN
EN
2
30
2
32