Audio Bit
Rate:
Sets to
High
normally when using two audio devices simultaneously.
High: High sound quality
Low: High connectivity of sound
When
Dual Audio
●
automatically.
When
Dual Audio
●
automatically.
Setting to
Low
●
Settings in the Sound Menu may not be effective for the Bluetooth audio
●
devices.
To use Audio Link
●
1) Display Home with HOME.
2) Select
Apps
and press
3) Select
Audio Link
4) Follow the on-screen instructions.
This setup is not designed for the remote control supporting Bluetooth
●
wireless technology.
For secure connection, it is recommended to use a device supporting
●
Bluetooth 4.2 or later. The encryption type depends on the connected
device.
If using the 2.4 GHz band on the wireless router, simultaneous use with
●
Bluetooth device may result in connection interruptions. If your wireless
router supports 5 GHz band, try using the 5 GHz band. If you have a wired
LAN connection, try using the wired LAN connection.
Also try to set
Unpair
delete the Bluetooth remote control information. (Voice control function
using the microphone of the remote control is only disabled.)
Functions > Voice Control > Settings
If the sound interruption occurs, place Bluetooth device closer to the TV.
●
When a Bluetooth device is connected to the TV, it is possible that the
●
Bluetooth audio output may not be synchronised (i.e. be delayed) with
relation to the images on the screen. This is not a defect of the TV or the
device. The delay time will differ depending on the device.
is set to On,
Audio Bit Rate
(High
can be selected manually.)
is set to Off,
Audio Bit Rate
(Low
can be selected manually.)
may resolve the sound interruption.
OK
to access.
and press
OK
to access.
in
Remote Control Settings
- 288 -
is set to
Low
is set to
High
to cancel the pairing and