Note
TV Guide
may also be used to set timer event.
●
Watching > TV Guide > Timer Programming
Timer Programming
●
Timer Programming
●
received via the signal from the broadcaster or service provider.
For recording using
●
Standby.
Depending on the progress of recording, analogue channel may not be
●
selected.
Recording an encrypted (copy-protected) programme may not be possible.
●
When the start time comes, the channel may be switched automatically
●
and the video and audio signals may be output. 2 minutes before the start
time, a reminder message may appear if you are watching TV.
– To remove the message and start the programming, press OK.
– To cancel the programming, press EXIT.
LED lights orange in Standby mode when
●
"!" identifies that three or more timer events are overlapped. As for
●
the overlapped recording events, the first event starts and finishes as
programmed. The next event can then start.
The recording of
●
channel to the programmed channel a few seconds before the start time.
For details of the USB HDD
●
Recording > Technical information
can store up to 15 events.
only works reliably if correct time information is
Timer
Programming, the TV must be either on or in
Timer Programming
- 161 -
Timer Programming
may automatically change the
is set.