Table of Contents
Advertisement
WARNING! Never clean air filter with gasoline or an easy ignited solvent it may
cause explosion.
1. Remove the air cleaner cover (A), and carefully remove the filter element (B) (Fig P)
2. Clean all parts.
3. Blow off dirt from filter element with pressure air.
4. Reinstall the filter element and air cleaner cover.
SPARK PLUG
Recommended spark plug: F7RTC
Stop the engine and allow it to cool
WARNING! DO NOT use an incorrectly rated plug. It is essential to keep the
spark plug in good condition-clean and properly adjusted.
WARNING! To keep engine at top performance spark plug gap should be within
specified and carbon built up free.
1. Removing spark plug with a spark plug wrench.
2. Inspect the spark plug visually. If spark plug is worn, dirty or has cracks, replace with the
recommended type and heat range.
3. The correct air gap is 0.70 to 0.80mm (Fig Q)
4. Tighten the spark plug.
5. After spark plug is tight; torque to 25-30N.m.
Fig P
Fig Q
15 / 21
Advertisement
Table of Contents
