Anti-Tilting Kit; Adjusting The Feet - Bush CTFS60DFCB Instruction Manual

Installing your combined cooker
Bringing it all together

Anti-tilting kit

1
Anti-tilting
Bracket (x1) (will
be attached to
the wall)
The document bag contains an anti-tilting kit. Loosely
attach the anti-tilting bracket (1) to the wall using the
screw (2) and dowel (3), following the measurements
shown in the figure and table below. Adjust the height
of the anti-tilting bracket so that it lines up with the
slot on the cooker and tighten the screw. Push the
appliance towards the wall making sure that the anti-
tilting bracket is inserted into the slot on the rear of the
appliance.
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
2
Screw (x1)
3
Dowel (x1)
A
Wall
Anti-
tilting
bracket
Product Dimensions
(Width X Depth X Height) (Cm)
60x60x90 (Double Oven)
50x60x90 (Double Oven)
90x60x85
60x60x90
60x60x85
50x60x90
50x60x85
50x50x90
50x50x85

Adjusting the feet

Your product stands on four adjustable feet. For safe
operation, it is important that your appliance is correctly
balanced. Make sure the appliance is level prior to
cooking. To increase the height of the appliance, turn
the feet anti-clockwise. To decrease the height of the
appliance, turn the feet clockwise.
It is possible to raise the height of the appliance up to
30 mm by adjusting the feet. The appliance is heavy
and we recommend that a minimum of 2 people lift it.
Never drag the appliance.
Installing your combined cooker
B
A (mm) B (mm)
297.5 52
247.5 52
430 107
309.5 112
309.5 64
247.5 112
247.5 64
247.5 112
247.5 64
21