Video Settings - Pioneer DMH-WT3800NEX Operation Manual

2
Touch then
3
Touch [Crossover] or [Subwoofer Settings].
4
Touch or
5
Drag the graph line to set the cutoff position.
6
Drag the lowest point of the graph to set the cutoff slope.
The following items can also be set.
Switches the subwoofer phase between normal and reverse position.
TIP
You can also adjust the [High] and [Mid] phase in [Network Mode].
Switches the [LPF]/[HPF] setting to [On] or [Off]. When it is turned off, the high-
[LPF]/[HPF]
pass filter or low-pass filter of each speaker can also be turned on by touching the
graph lines.

Video settings

The menu items vary according to the source.
[Time Per Photo Slide]
Menu Item
[Time Per Photo Slide]
[5sec] [10sec] [15sec]
[Manual]
[Video Signal Setting]
Menu Item
[AUX]
[Auto] [PAL] [NTSC]
[PAL-M] [PAL-N] [SECAM]
[Back-up Camera]
[Auto] [PAL] [NTSC]
[PAL-M] [PAL-N] [SECAM]
[2nd Camera]*
[Auto] [PAL] [NTSC]
[PAL-M] [PAL-N] [SECAM]
.
to switch the speaker.
Description
Select the interval of image file slideshows on this product.
Description
Select the suitable video signal setting when you connect
this product to an AUX equipment.
Select the suitable video signal setting when you connect
this product to a rear view camera.
Select the suitable video signal setting when you connect
this product to a 2nd camera.
- 99 -