Table of Contents
Advertisement
16.3 Activating Wi-Fi on the
appliance
Note: When Wi-Fi is activated, the en-
ergy consumption increases in com-
parison to the values specified in the
consumption value table.
Press and hold
1.
seconds.
Set the programme to position 4.
2.
a The display shows Con.
Press
repeatedly until the dis-
3.
play shows on.
a Wi-Fi is activated.
16.4 Deactivating Wi-Fi on the
appliance
Press and hold
1.
three seconds.
Set the programme to position 4.
2.
a The display shows Con.
Press
repeatedly until the dis-
3.
play shows oFF.
a Wi-Fi is deactivated.
Note: The connection is automatically
re-established when the Wi-Fi is
switched back on.
16.5 Resetting the appliance
network settings
Press and hold
1.
3 seconds.
Set the programme to position 5.
2.
a The display shows rES.
Press
.
3.
a The display shows Yes.
Press
.
4.
a The network settings are reset.
a If End is shown on the display, the
network settings are reset.
for approx. 3
for at least
for at least
16.6 Remote start
Enable the appliance for remote start
via the Home Connect app.
Activating remote start
Notes
¡ Remote start is deactivated for
safety reasons in the following
circumstances:
– Open the appliance door.
– Press
.
– Press
.
– Switch off the appliance.
– Following a power cut.
¡ Remote start cannot be activated
for safety reasons in the following
circumstances:
– The appliance door is open.
– The detergent drawer has not
been pushed in fully.
Requirements
¡ The appliance is connected to your
Wi-Fi home network.
¡ The appliance is connected to the
Home Connect app.
¡ A programme is selected.
Press
.
▶
If you press and hold the button
for at least 3 seconds, the
Home Connect menu opens.
If you briefly press the button, the
appliance is enabled for remote
start via the Home Connect app.
If you open the appliance door, the
function is automatically deactiv-
ated.
lights up.
a
Note: To deactivate the function,
press
.
Home Connect en
37
Advertisement
Table of Contents
