Advertisement
Operation
To reduce the risk of injury, do not
CAUTION
stare at the operating light source.
Press the power/mode button
and off. Press and hold the power/mode button
cycle between high and low power settings.
The indicator light will display the battery life:
Red Flashing: 0-3% remaining
Red Solid: 4-10% remaining
Yellow Solid: 11-49% remaining
Green Solid: 50-100% remaining
Extreme Cold: When the battery is < -20°C/-4°F, the
LEDs will flash red/green 3 times before entering sleep
mode. When the battery is -20°C/-4°F to -15°C/5°F,
only low and medium modes are available.
Overheating: If the flashlight starts to dim and the
indicator light is solid red, the battery may be too hot.
Normal function will resume when the battery has
cooled.
To reduce the risk of injury, always
WARNING
unplug the charger and remove the
battery from the charger before performing any
maintenance. The charger and battery have no
internal serviceable parts. Never disassemble the
battery or charger.
Maintenance and Storage
Store your charger in a cool, dry place.
As a general practice, it is best to unplug battery
chargers and remove batteries when not in use. No
battery damage will occur, however, if the charger and
battery are left plugged in.
Cleaning
Clean out dust and debris from charger vents and
electrical contacts by blowing with compressed air.
Use only mild soap and a damp cloth to clean the
battery and charger, keeping away from all electrical
contacts. Certain cleaning agents and solvents are
harmful to plastics and other insulated parts. Some of
these include petrol, turpentine, lacquer thinner, paint
thinner, chlorinated cleaning solvents, ammonia and
household detergents containing ammonia. Never use
flammable or combustible solvents around batteries,
charger, or tools.
to turn the light on
to
3
Advertisement
