Ricatech RR1000 User Manual page 5

RADIO OPERATION
1. Set the MODE selector to your desired band.
2. Adjust the sound with the VOLUME knob.
3. Tune to the desired radio station by using the TUNING knob.
4. To turn off the radio, press the POWER button.
LIGHT OPERATION
1. Press the LIGHT button to turn on all the light.
2. To Turn off the light, press the LIGHT button again.
NOTE:
1. (FOR "NEON LIGHTS" VERSION ONLY)
Please note that Neon lights will not work while in AM / MW radio mode. This is due to interference
caused by neon lighting and is a usual occurrence.
2. LIGHT MODE (IF EQUIPPED "BULB LIGHTS" VERSION ONLY)
Switch the MODE selector at back cover to change light mode.
3. LIGHT MODE (IF EQUIPPED AT BACK COVER "LED LIGHTS" VERSION ONLY)
The colors of the lights change overtime, switch to HOLD position to remain static to your favourite
color. Switch to PLAY position to resume
*IMPORTANT NOTE: (LED LIGHTS VERSION ONLY)
The changing colors sequences of lights are controlled by IC, the lights maybe turned off when
the light mode in HOLD position is normal.
EXTERNAL SPEAKER CONNECTION (IF EQUIPPED)
Connect each speaker wire to the speaker terminal at the back cover, switch the speaker switch to
extenal.
AUXILIARY CONNECTION "AUX IN" (IF EQUIPPED)
1. Connect your own device (i.e. MP3 player or IPOD) to the "AUX IN connection" (located at the
back of cabinet) with stereo plug and detachable rack (packed separately).
2. Adjust the ON / OFF switch next to the jack to the „ON‟ position.
3. Rotate the mode selector to "CD-AUX".
4. Adjust the sound with the VOLUME knob or the volume control of the device.
5. When change to another mode, the device will continue to play with no sound until the ON / OFF
switch is adjusted to „OFF‟ position and switch off the device.
IMPORTANT NOTE:
1. Adjust the ON / OFF switch to the „OFF‟ position when not in use.
2. The CD function will resume to normal only after the ON / OFF switch is adjusted to „OFF‟ position.
5