Programmed Disc Play; Repeat Disc Play - Ricatech RR1000 User Manual

TO PLAY A CD
1. Press the POWER switch and select MODE SELECTOR to CD.
2. Flip open the semi circle "CD DOOR".
3. Turn the "RESET" pointer to "OFF" position and insert a disc onto the disc tray.
**(Make sure the "RESET" pointer in "ON" position after disc loaded.)
4. Press the PLAY/PAUSE button to play the CD, press once again to temporarily stop disc play.
5. Press STOP to stop playing the CD.
6. Adjust listening level and sound effect with Volume,Treble and Bass knob
7. Press SKIP FORWARD to skip ahead to next track. Press SKIP BACKWARD to skip back to
previous track. The track number will be displayed in readout.
8. During disc play mode, press the FAST FORWARD or FAST REWIND to search a particular point
quickly.
NOTE:
If the disc is seriously scratched, or too dirty, disc play may not start.
If an improperly centered disc is played, noise can be heard in the mechanism. The use of such discs
should be avoided.

PROGRAMMED DISC PLAY

It is not possible to enter programs during disc play. Press the STOP button first, then enter a program.
1. Press the STOP button.
2. Press the PROGRAM button. Select a track number using SKIP FORWARD or SKIP BACKWARD
button,press PROGRAM button again
3. Repeat step 2 until all the desired tracks are programmed in memory
NOTE:
To modify the program, press the STOP button and restart from step 2.
-To clear the program, press the STOP or power is switched off

REPEAT DISC PLAY

1. Press REPEAT button once to repeat disc play of one track.
2. Press REPEAT button twice to repeat all the track on the disc.
3. Select the desired track for disc play using SKIP FORWARD or SKIP BACKWARD button.
4. Press the PLAY/PAUSE button to play
5. Press STOP button to cancel repeat mode.
RANDOM DISC PLAY
1. Press the RANDOM button to play CD in random order.
2. To cancel RANDOM, press STOP button
MUTE DISC PLAY
1. Press MUTE button to muting the sound while playing disc. *The MUTE indicator on the CD control
panel will be lighted up.
2. To resume press MUTE again and the MUTE indicator will goes off
4