Table of Contents
Advertisement
en Installation and connection
Remove the 4 sleeves.
4.
Put on the 4 cover caps.
5.
Push the 4 cover caps downwards.
6.
Note: To install the transport locks to
transport the appliance, perform
these steps again in the reverse or-
der.
14
4.5 Connecting the appliance
Connecting the water inlet hose
Connect the water inlet hose.
1.
Connect the water inlet hose to a
2.
tap (26.4 mm = 3/4").
When connecting to a 21 mm = ½"
3.
tap, first fit the adapter with a seal-
ing washer.
Open the water tap carefully and
4.
check that the connection points
are tight.
Advertisement
Table of Contents
