Silver Spring WR1031 Manual

Silver Spring WR1031 Manual

Folding ramp with wheels - 10' and 12'

Advertisement

Folding Ramp with
Wheels - 10' and 12'
Instructions for Part #s WR1031, WR1231
GENERAL GUIDELINES & SAFETY
• It is the user's responsibility to read and follow all instructions.
• Keep these instructions with the product at all times and review before each use.
• It is the responsibility of this product's owner to furnish the instructions to any person that borrows
or purchases the product.
• Inspect the product before use to ensure it is assembled properly and all parts are in safe working
order and free of defects.
• Never modify this product in any way.
• All circumstances cannot be addressed in these instructions.
Please use common sense and practice general safety measures when using this product.
• Parts and/or instructions are subject to change without notice.
• Only for use with wheelchairs, scooters, and other mobility equipment
• Always anchor the ramp to the step or ledge before use.
• Never exceed the 800 lb weight capacity.
• When stored in an upright position, be sure ground is level.
If no level surface is available, ramp should not be stored upright.
• Children should not play on or around the ramp when in use or stored upright.
010323
1-888-651-3431
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WR1031 and is the answer not in the manual?

Questions and answers

Summary of Contents for Silver Spring WR1031

  • Page 1 Folding Ramp with Wheels - 10' and 12' Instructions for Part #s WR1031, WR1231 GENERAL GUIDELINES & SAFETY • It is the user’s responsibility to read and follow all instructions. • Keep these instructions with the product at all times and review before each use.
  • Page 2 PARTS 010323 1-888-651-3431 Page 2...
  • Page 3 ASSEMBLY Step 1: To secure the ramp while folded or unfolded, first thread the dowel pins. To release the pins, pull out the handles and turn clockwise. After the ramp is folded or unfolded, turn the handles counter clockwise. The pins will automatically insert into the ramp. To release pin, rotate the handle counter clockwise.
  • Page 4 010323 1-888-651-3431 Page 4...
  • Page 5 FOLDING Step 1: Lock all four pins out by holding and pulling the handles back and rotating them clockwise. Once all four pins are locked out, continue to step 2. NOTE: Specific pin operations can be found on page 3. Step 2: Fold the short side of the ramp on top of the long side.
  • Page 6 PRODUCT WARRANTY & LIABILITY GENERAL PRODUCT WARRANTY: Products purchased from the Authorized Dealer (original place of purchase) or Merchant (“Dealer”) will be free of defects in material and workmanship at the time of receipt, and will meet the specifications stated at the place of purchase transaction or online at the Dealer’s website, under normal use and service when correctly installed, operated and maintained.

This manual is also suitable for:

Wr1231

Table of Contents