Silver Spring SFPAS Instructions Manual

Silver Spring SFPAS Instructions Manual

Single-fold ramp

Advertisement

Quick Links

Single-fold Ramp
Portable ramp for temporary or semi-permanent use.
Instructions for Part #SFPAS
GENERAL GUIDELINES & SAFETY
• It is the user's responsibility to read and follow all instructions
• Keep these instructions with the product at all times and review before each use
• It is the responsibility of this product's owner to furnish the instructions to any person that borrows or
purchases the product
• Inspect the product before use to ensure it is assembled properly and all parts are in safe working
order and free of defects
• Never modify this product in any way
• All circumstances cannot be addressed in these instructions
• Please use common sense and practice general safety measures when using this product
Parts and/or instructions are subject to change without notice
17592 REV 07-19-2021
1-888-651-3431
All text and images contained in this document are
copyrighted, proprietary, and may not be shared, modified,
distributed, reproduced, or reused without the express
written permission from the manufacturer.
Patented.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SFPAS and is the answer not in the manual?

Questions and answers

Summary of Contents for Silver Spring SFPAS

  • Page 1 Single-fold Ramp Portable ramp for temporary or semi-permanent use. Instructions for Part #SFPAS GENERAL GUIDELINES & SAFETY • It is the user’s responsibility to read and follow all instructions • Keep these instructions with the product at all times and review before each use •...
  • Page 2 SYMBOLS The WARNING symbol indicates a potentially hazardous condition/situation. The warnings throughout this document, and on your equipment, if any, are for the protection of people and property. Failure to abide by warnings will result in a waiver of all liabilities, loss of your warranty, and could result in equipment damage and or failure, property damage, risk of serious bodily injury, and or death to operators, riders, and those nearby.
  • Page 3 GETTING STARTED 1. Read this instruction manual in its entirety before use and follow all instructions before and during use. 2. Before use, refer to your mobility equipment's owner guide for acceptable ramp usage, including proper slope/incline, chair direction, etc.; never exceed its recommendations. 3.
  • Page 4 SET UP AND USE 1. The ramp is shipped fully assembled. To unfold for use, position the folded ramp so that the top lip transition plate (located on the end of the ramp that is labeled TOP) fully overlaps a secure, unobstructed, level landing and is securely supporting the ramp (FIG.
  • Page 5 5. For stowage and transportation, or for loading unoccupied mobility equipment with a wider wheelbase, the ramp can be separated into two halves (FIG. 4) by removing (2 ea.) hinge pins. The ramp may be separated for use when loading or unloading unoccupied mobility equipment only.
  • Page 6 OPTIONAL ACCESSORY 1. If the ramp’s top lip transition plates are not long enough to fully overlap a secure, unobstructed, level landing, a SUITCASE® Top Lip Extension (‘TLE’) is an available option that increases the standard 3” reach of the top lip transition plates to 9”, in many cases, allowing the ramp to clear an obstruction to create a smooth transition.
  • Page 7 PRODUCT WARRANTY & LIABILITY GENERAL PRODUCT WARRANTY: Products purchased from the Authorized Dealer (original place of purchase) or Merchant (“Dealer”) will be free of defects in material and workmanship at the time of receipt, and will meet the specifications stated at the place of purchase transaction or online at the Dealer’s website, under normal use and service when correctly installed, operated and maintained.

Table of Contents