Specifications - Makita ADCU10 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Overall length (without guide bar)
Rated voltage
Net weight
Standard guide bar length
Recommended guide
bar length
Applicable saw chain type
(refer to the table below)
Standard sprocket
Chain speed
Chain oil tank volume
• Due to our continuing program of research and development, the specifications herein are sub-
ject to change without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The light-
est and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your
region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other
battery cartridges and chargers may cause injury and/or fire.
with 90PX
Number of teeth
Pitch
XCU05 XCU06
200 mm 250 mm
(8") (10")
(0 - 1,440 m/min)
(0 - 4,720 ft/min)
140 cm
BL1815N / BL1820B / BL1830 / BL1830B /
BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD /
DC18SE / DC18SF / DC18SH
2 ENGLISH
XCU10
256 mm
(10-1/8")
D.C. 18 V
2.7 - 3.2 kg
(6.0 - 7.1 lbs)
300 mm
(12")
200 - 300 mm
(8" - 12")
90PX
6
3/8"
0 - 24 m/s
3
(4.7 fl oz)
ADCU10