Cleaning The Spray Arms - Atag VA7213SLO User Manual

Care and cleaning
NOTE!
Dishwashing results may be affected if the coarse and fine filters are incorrectly fitted. The
dishwasher must not be used without the filters in place!

Cleaning the spray arms

Holes and bearings can sometimes become blocked. Remove any debris using a pin or the like.
The spray arms also have holes underneath.
To facilitate cleaning you can remove the spray arms. Remember to fit them firmly back into place
afterwards.
Upper spray arm
Pull out the upper basket.
Unscrew the spray arm bearings anticlockwise to remove the spray arm from the upper basket.
Lower spray arm
Pull the lower spray arm straight up to release it.
26
Check that the yellow
drainage pump stop (on the
right in the bottom drain) is in
place.