Installation - Chef cooking CFG515WB User Manual

installation

Procedure to remove the door
(to be done by qualified personnel only)
Stirrup
1. With door fully open, rotate the two stirrups
to its rest position (to engage the stirrups).
2. Close the door until it stops against the stirrups.
3. Close the door further.
18 INSTALLATION Chef 540 Upright Cooker
4. Lift the door slightly and evenly while continuing
to slowly close the door.
5. Remove the door by lowering gently and pull
away from the frame of the oven. Care should
be taken not to damage kick panel and other
parts of the cooker.
installation
installation
Procedure to assemble the door
Procedure to assemble the door
Procedure to assemble the door (to be done by qualified personnel only).
(to be done by personnel only)
(to be done by qualified personnel only)
Frame slot
Hinge
Frame slot
Notch
Hinge
Notch
Notch
1. Hold door with both
1. Hold door with both hands.
1. Hold door with both hands. hands and locate both
hinges into the frame slots
2. Locate both hinges into the frame slots at the
2. Locate both hinges into the frame slots at the at the same time.
same time.
same time.
Frame slot
Frame slot
Hinge Hinge
Notch
Notch
3. Ensure that the location notch drops into frame
3. Ensure that the location notch drops into frame
slot. Care should be taken not to damage other
slot. Care should be taken not to damage other
parts of the cooker.
parts of the cooker.
4. Open door fully and rotate stirrups away from
4. Open door fully and rotate stirrups away from
you back to their original position.
you back to their original position.
2. Ensure that the location notch drops into the
5. Close the door fully. 5. Close the door fully.
frame slot.
Care should be taken not to damage other
6. Carefully remove any protective plastic film
parts of the cooker.
to prevent damage to the appliance.
4. Close the door fully.
Chef 540 Upright Cooker INSTALLATION 19
Chef 540 Upright Cooker INSTALLATION 19
3. Open door f
the stirrups awa
back to their ori