Installation - Chef cooking CFE536SB User Manual

installation

Procedure to remove the door
Stirrup
1. With door fully open, rotate the two stirrups
to its rest position (to engage the stirrups).
2. Close the door until it stops against the stirrups.
3. Close the door further.
18 INSTALLATION Chef 540 Upright Cooker
4. Lift the door slightly and evenly while continuing
to slowly close the door.
5. Remove the door by lowering gently and pull
away from the frame of the oven. Care should
be taken not to damage kick panel and other
parts of the cooker.
installation
Procedure to assemble the door
Frame slot
Frame slot
Hinge
Hinge
Frame slot
Notch
Frame slot
Notch
Hinge
Hinge
Notch
Notch
Notch
1. Hold door with both
1. Hold door with both hands.
2. Locate both hinges into the frame slots at the
same time.
Frame slot
Hinge
Notch
3. Ensure that the location notch drops into frame
slot. Care should be taken not to damage other
parts of the cooker.
Stirrup
4. Open door fully and rotate stirrups away from
you back to their original position.
5. Close the door fully.
6. Carefully remove any protective plastic film
to prevent damage to the appliance.
Chef 540 Upright Cooker INSTALLATION 19