Advertisement
TE-4201
Tinytag Plus LAN Temperature Data Logger for PT1000 Probe
Data Logging
This data logger will turn on and start recording as soon as it is plugged into a
Power over Ethernet (PoE) supply (it can also be turned on before that by
pressing and holding the logger's Mute button briefly) .
Logging Interval
Default Logging Interval
Logging/Off-line Capacity
The logging/off-line capacity for a data logger, for any given logging interval, is
stated at the bottom of the configuration page in Tinytag Explorer when the
logger is programmed.
Standalone Mode
If being used as a standalone device, the logger should be launched using
Tinytag Explorer to ensure its clock is set correctly.
Reading Specification
Temperature
Reading Range
Sensor Type
Logger Resolution
Temperature Stability
Logger Accuracy
The graph below is the accuracy of the TE-4201 when used with a PB-7002
probe. Using a different probe may effect the accuracy of the unit.
BERMAN Termómetros e Instrumentación S.L.
ventas@e-berman.info
Telf. 93 263 24 50
2 minutes to 10 days
10 minutes
361 days typical, at a 10 minute
logging interval
-200°C to +100°C
PT1000 (external probe, 3-wire)
0.01°C or better
±0.01°C/°C change from 25°C
Physical Specification
IP Rating
*Applies only if the supplied waterproof shroud for the Ethernet connection is
fitted.
This data logger is for indoor use only. The waterproofing provided by
the connector shroud is to protect against ingress in indoor applications
when condensation or liquids may be present.
Operational Range**
Case Dimensions
Length/Height
Width
Depth
Weight
**The Operational Range indicates the physical limits to which the unit can be
exposed.
Mounting Instructions
The logger can be wall mounted or placed
on its back on a flat surface, such as a
shelf.
The logger's back-plate has mounting
holes, as shown.
www.e-berman.info
IP67*
-20°C to +55°C
161mm / 6.34"
113mm / 4.45"
62mm / 2.44"
394g / 13.9oz
Issue 1 (16th June 2017) E&OE
Advertisement
