Pioneer MVH-S510BT Operation Manual page 12

Important
• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running
can drain the vehicle's battery.
• Be sure to park your vehicle in a safe place and apply the parking brake before operation.
To make a phone call
1
Press to display the phone menu.
When two phones are connected, a phone name appears first then a phone menu
will display. To switch to another phone, press
2
Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to confirm.
If you select [PHONE BOOK], proceed to step 4.
3
Turn the M.C. dial to select [MISSED], [DIALLED] or [RECEIVED], then press to
confirm.
4
Turn the M.C. dial to select a name or phone number, then press to confirm.
The phone call starts.
To answer an incoming call
1
Press any button when a call is received.
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call while one
phone is being used for a call, a message will appear in the display. To answer that incoming call, you
need to end the existing call.
Basic operations
Purpose
End a call
Reject an incoming call
Switch between the current caller
and a caller on hold
Cancel a caller on hold
Adjust the volume of the caller's
voice (When private mode is on,
this function is not available.)
Turn the private mode on or off
To preset phone numbers
1
Select a phone number from a phone book or call history.
again.
Operation
Press .
Press and hold
Press the M.C. dial.
Press and hold
Turn the M.C. dial during the call.
Press BAND/ during the call.
- 12 -
when a call is received.
.