Taking Pictures Using The Built-In Flash - Panasonic Lumix DMC-FX50 Operating Instructions Manual

Panasonic lumix dmc-fx50: operating instruction
Hide thumbs Also See for Lumix DMC-FX50:
Table of Contents

Advertisement

Canceling High angle mode or Power
LCD
• If you press and hold [LCD MODE] again
for 1 second the screen shown in step
is displayed. Select [OFF] to cancel Power
LCD mode or High angle mode.
• High angle mode is also canceled if you
turn the camera off or power save mode is
activated.
• The brightness of the pictures displayed
on the LCD monitor is adjusted when
Power LCD mode or High angle mode is
activated. Therefore, some subjects may
look different on the LCD monitor.
However, this does not affect the recorded
pictures.
• The LCD monitor automatically returns to
normal brightness after 30 seconds when
recording in Power LCD mode. Press any
button to make the LCD monitor bright
again.
• You may not notice the High angle mode
effect if the LCD monitor is difficult to see
because of light from the sun etc. shining
on it. In this case, we recommend using
your hand or another object to block the
light when using the camera.
• High angle mode is not activated in the
following cases.
– In simple mode [
]
– In playback mode
– While the menu screen is displayed
– While the review screen is displayed
Taking Pictures using
the Built-in Flash
2
: Photo flash
Do not cover it with your fingers or other
objects.
Switching to the appropriate flash
setting
Set the flash to match the recording.
1 Move
[ ].
2 Move
/
to select a mode.
FLASH
AUTO
AUTO/RED-EYE
FORCED FLASH ON
SLOW SYNC./RED-EYE
FORCED OFF
SELECT
• You can also move
• For information about flash settings that
can be selected, refer to "Available flash
settings by recording mode". (P40)
3 Press [MENU/SET].
• You can also press the shutter
button halfway to finish.
• The menu screen disappears after
about 5 seconds. At this time, the
selected item is automatically set.
Advanced
MENU
SET
[ ] to select.
39
VQT0Y19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents