9.1.2.
Check Record
9.1.2.1.
Base Unit
A) Not record Incoming Message
Check Bell signal.
Does the unit catch line?
Check Line In: Pin 16 of BBIC.
Check Auto Disconnect Circuit.
Check Parallel Connection Detection
Circuit.
Check BBIC and Flash Memory.
Cross Reference:
Signal Route (P.18)
Telephone Line Interface (P.14)
OK
YES
OK
OK
OK
KX-TGC210/KX-TGC212/KX-TGC213/KX-TGC220/KX-TGC222/KX-TGCA20
NO
Check Telephone Line Interface
[Bell].
NO
Check Telephone Line Interface
[OFF HOOK].
NO
Check ICM Recording in Signal Route.
Note:
Flash Memory is IC601.
BBIC is IC501.
29